Recognized under UGC Section (2f) of the UGC Act 1956

B.Tech ( Hons ) Civil Engineering

Duration 4 Years and 3 Years for Lateral Entry

Eligibility Criteria 10+2 with minimum 45% Marks in Physics, Mathematics along with Chemistry/ Biotechnology/ Computer Science as one of the subjects. For Lateral entry: a. Passed Diploma examination with at least 50% marks in ANY branch of Engineering and Technology b: Passed B.Sc. Degree from a recognized University as defined by UGC, with at least 50% marks and passed 10+2 examination with Mathematics as a subject c: Provided that the students belonging to B.Sc. Stream, shall clear the subjects Engineering Graphics/ Engineering Drawing and Engineering Mechanics of the First Year Engineering Programme along with the Second-year subjects d: Provided that the students belonging to B.Sc. Stream shall be considered only after filling the supernumerary seats in this category with students belonging to the Diploma stream e: Passed D. Voc. Stream in the same or allied sector f: In the above cases, a suitable bridge Courses, if required such as in Mathematics may be conducted.

Shivalik college

  • The B.Tech ( Hons ) Civil Engineering Program intends to equip students with the prominent theoretical and practical knowledge to make industry-ready engineers.
  • The corresponding curriculum is uniquely designed with a futuristic perspective. Therefore, the curriculum also involves industry training that prepares students to tackle any challenge which may arise from the cutting-edge technological revolution.
  • This program covers fundamental and advanced levels in subjects like mechanics/dynamics of soils, transportation, construction technology, environmental engineering, and construction project management.
  • The program is based on three fundamental principles namely -offering social context to education, offering maximum choice to students to choose a most suitable career path, and motivating active learning.
  • Students can better address problems with an extensive conception and perspective. They are imparted critical analytical skills needed to plan, design, build, maintain and revitalize infrastructure requirements for a sustainable future.

Why take this Course?

  • The B Tech ( Hons ) Civil Engineering Program intends to equip students with the prominent theoretical and practical knowledge to make industry-ready engineers.
  • The corresponding curriculum is uniquely designed with a futuristic perspective. Therefore, the curriculum also involves industry training that prepares students to tackle any challenge which may arise from the cutting-edge technological revolution.
  • This program covers fundamental and advanced levels in subjects like mechanics/dynamics of soils, transportation, construction technology, environmental engineering, and construction project management.
  • The program is based on three fundamental principles namely -offering social context to education, offering maximum choice to students to choose a most suitable career path, and motivating active learning.
  • Students can better address problems with an extensive conception and perspective. They are imparted critical analytical skills needed to plan, design, build, maintain and revitalize infrastructure requirements for a sustainable future.
  • Few of the areas that are presently in demand for B.Tech ( Hons ) Civil Engineering graduates are:
    • Maintenance and Rehabilitation of the structures
    • Project Management
    • Hydraulic and Water Resources Engineering
    • Remote Sensing and GIS
    • Geotechnical Engineering
    • Quantity Surveying
    • Environmental Engineering
    • Structural Engineering
    • Transportation Engineering

Why choose Us?

  • The curriculum of the B.Tech ( Hons ) Civil Engineering program at Shivalik College provides a broad range of project exposure, practical training, expert interaction, and more. Theoretical education provides enough foundational knowledge whereas real-time exposure fulfills the industry demands.
  • Through a proactive and transparent system of teaching, the department is proud of its dedicated team for designing, curriculum evaluation, research, and innovation
  • The Civil Engineering department at Shivalik college focuses on improving student skills in terms of cutting-edge technologies like Artificial intelligence in construction, structural health monitoring, computer-aided education, smart materials, robotics in civil engineering, deployment of 3D printing in construction, GIS and GPS in civil engineering, etc.
  • To update the soft skills of students, the Civil Engineering department of this college conducts model exhibitions, events, and quizzes.
  • Decent placement assistance is provided with an attractive salary package to students.
  • Easy financing options are available for admissions, specifically for students from poor socio-economic backgrounds.
  • Guest lectures and workshops are organized to assist students to acknowledge the real-world methodologies used in different Civil Engineering projects.
  • Industrial practices are facilitated by organizing field visits.

Progressions & Career

Here are the opportunities after pursuing B.Tech ( Hons ) Civil Engineering:

Progression:

Main specializations offered under M.Tech in Civil Engineering are:

  • M. Tech. in Civil Engineering – Building Technology and Construction Management
  • M. Tech. in Civil Engineering – Geotechnical Engineering
  • M. Tech. in Civil Engineering – Environmental Engineering
  • M. Tech. in Civil Engineering – Hydraulic and Water Resources Engineering
  • M. Tech. in Civil Engineering – Transportation Engineering
  • M. Tech. in Civil Engineering – Structural Engineering

Career:

Below are the leading career roles candidates can choose after completing B.Tech ( Hons ) Civil Engineering:

  • Being a fresher in the real estate industry or construction industry or Infrastructure & project industry, a graduate Civil Engineer can start his/her career as a site engineer.
  • Ample job opportunities are available in Public sector Undertakings (PSUs).
  • After completing preparation for exams like UPSC and IES, you can apply for government engineering jobs.
  • A graduate Civil engineer can start a Civil Engineering and Construction Business.

The Shivalik Advantage

Certain unique qualities of the Shivalik College set them apart from the rest of the colleges. They make the institute the

Best Civil Engineering College.

  • Best-in-class infrastructure
  • Well-equipped Labs (Concrete technology, Strength of materials, Engineering geology, Material testing, CAD, Geotechnical engineering labs)
  • ICT enabled classroom
  • Modern Library
  • Experienced faculties with Master and Ph.D. from IIT, NIT, Delhi Technical University
  • Personalized career coaching assistance for competitive examination
  • Proactive and transparent system of teaching-learning
  • Unique mentorship approach
  • Placement Assistance
  • Workshops & Seminar
  • Clubs & Activities
  • Highly efficient program policy
  • Includes Entrepreneurship Development Cell in association with NIESBUD (Ministry of Skill Development, Govt. of India)
  • Includes Incubation Centre in collaboration with Industry & MSME Government of India
  • Always focuses on adopting total quality management to incorporate quality faculty and equip students with proficiency in core Civil technical and managerial aspects.

Top Recruiters

FAQ's

For B Tech ( Hons ) Civil Engineering Admission 2024 in Shivalik College, you can fill up the ‘Enquire Now’ form by filling in details like name, email address, mobile number, state city, course, and specialization. You can enquire

You can visit the official website of Shivalik College for more details:

https://www.shivalikcollege.edu.in/academics/engineering/btech-civil-engineering

Visit the below link for a clear idea of the Btech ( Hons ) Civil Engineering Fees of this institute:

Fee Structure

Contact numbers are 6303 174 022 | 7055 613 063

Shivalik College is one of the Best B Tech ( Hons ) Civil Engineering College in Dehradun. The institute pride itself on being the most active and well-known one when it comes to encouraging students to find the job of their dreams. This institute is constantly ranked among the topmost colleges of India.
The Civil Engineering program at this institute emphasizes building the student’s proficiency in core subjects:

  • Materials Management
  • Hydraulics
  • Mechanics
  • Statistical Analysis, and more

Civil Engineering graduates can get good jobs not just in the private sector, but the public sector as well. For freshers, it is possible to be employed as junior engineers or trainees. They can appear in the UPSC exam for getting government jobs.

To get a decent job after B.Tech Civil is advisable for students to keep their resume up-to-date. Students are advised to maintain a decent score in their subjects. Also, they need to be well aware of what they aspire to do in their final year project and internship.

Civil Engineering course introduces students to a curriculum that focuses on design, planning, and construction of buildings and roads.  Typically, the syllabus includes Computer-Aided Analysis and Engineering Graphics and Design.

Civil Engineering is a decent career choice because it will be beneficial for you to build a structure with your name which lasts forever. Being a civil engineer, you can obtain a decent job in the private or Government sectors. Graduates of Civil engineering can start their consultancy firm as self-employed professionals.

Dr. Sneha Das is currently working as Head of the Department at Shivalik College of Engineering, Dehradun. She has done her PhD in Civil Engineering with specialization in Structural Engineering from Indian Institute of Technology, Mandi. She was awarded her PhD degree in 2022. Her research area is focused on Building Physics, and Durability design of structures. She has authored journal papers in reputed SCI indexed journals and have presented papers in international conferences of great repute in this area. She was also awarded the Director’s Foundation Day award for implementing an online project management system for managing the construction work at IIT Mandi.

Contact Info

Curriculum

BAST 101 BASP 101 Engineering Chemistry
BAST 102 Mathematics-I
BAST 103 BASP 103 English for Communication
BEET 101 BEEP 101 Fundamentals of Computers & Programming in C
BMEP 101 Manufacturing Practices / Workshop
BASP 102 Internship-I (60 Hrs Duration) at the Institute level

BAST 104 BASP 104 Engineering Physics
BAST 105 Mathematics-II
BMET 102BMEP 102 Basic Mechanical Engineering
BCET 101 BCEP 101 Basic Civil Engineering & Mechanics
BMEP 103 Engineering Graphics
BASP 106 Language Lab & Seminars
BEST 101 Environmental Studies

BAST-301 MATHEMATICS-III
BCET-302 CONSTRUCTION MATERIALS
BCET303 SURVEYING
BCET-304 BUILDING PLANNING & ARCHITECTURE
BCET-305 STRENGTH OF MATERIAL
BCEP-306 STUDY OF HISTORICAL & ANCIENT CIVIL ENGG. PRACTICES

BCET-401 ENERGY & ENVIROMENTAL ENGINEERING
BCET-402 CONCRETE TECHNOLOGY
BCET-403 STRUCTURAL ANALYSIS-I
BCET-404 TRANSPORTATION ENGINEERING-I
BCET-405 ENGINEERING GEOLOGY & REMOTE SENSING
BCEP 406 SOFTWARE LAB

BCET 501 DESIGN OF RC ELEMENT
BCET 502 GEOTECHNICAL ENGINEERING
BCET 503 FLUID MECHANIC
BCET 504(A) STRUCTURAL ANALYSIS-II
BCET 505(B) TRANSPORTATIONAL ENGINEERING-II
MATERIAL TESTING LAB

BCET 601 DSIGN OF RC STRUCTURE
BCET 602 ENVIRONMENTAL ENGINEERING-I
BCET 603 OPEN CHANNEL FLOW
BCET 604(A) GEOTECHNICAL ENGINEERING-II
BOEC605(B) ENVIRONMENTAL MANAGEMENT AND SUSTAINABLE DEVLOPMENT
BCEP606 ADVANCED SURVEYING LAB
BCEP607 MINOR PROJECT - I

TCE 701 BRIDGE ENGINEERING
TCE 702 TRANSPORTATIONAL ENGINEERING-II
TCE 703 SEISMOLOGY AND EARTHQUAKE
TCE 704 HYDRAULIC STRUCTURE
TCE 705 AIR AND WATER POLUTION
PCE 752 CAD LAB - I

TCE 801 HYDROPOWER ENGINEERING
TCE 804 CONSTRUCTION PLANNING & MANAGEMENT
TCE 806 ADVANCE HIGHWAY ENGINEERING
TCE 808 ENVIROMENTAL MANAGEMENT & SUSTAINABLE DEVELOPMENT
PCE 852 CAD LAB-II

B.Tech Civil Syllabus

Civil 2022
Civil 2021
Civil 2020
Civil 2019
Civil 2018
Civil 2017

Program Specific Outcomes and Program Educational Objectives

  • PO
    01

    Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and anengineering specialization to the solution of complex engineering problems

  • PO
    02

    Problem analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, andengineering sciences

  • PO
    03

    Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.

  • PO
    04

    Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information toprovide valid conclusions

  • PO
    05

    Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding ofthe limitations

  • PO
    06

    The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professionalengineering practice

  • PO
    07

    Environment and sustainability: Understand the impact of the professional engineering solutions insocietal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development

  • PO
    08

    Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of theengineering practice

  • PO
    09

    Individual and team work: Function effectively as an individual, and as a member or leader in diverseteams, and in multidisciplinary settings

  • PO
    10

    Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.

  • PO
    11

    Project management and finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one‘s own work, as a member and leader in a team, to manageprojects and in multidisciplinary environments

  • PO
    12

    Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

  • PSO
    01

    Students will be able to plan and design building, roads, bridges and hydraulic structures.

  • PSO
    02

    Students will be able to apply modern construction techniques and management tools to execute civil engineering projects.

  • PEO
    01

    To provide graduates with sound fundamental knowledge to design solutions for complex civil engineering problems.

  • PEO
    02

    To bring out an effective teaching learning process,through which the students will contribute to the development of sustainable infrastructure.

  • PEO
    03

    To provide an excellenmt academic environment for the students with asrong etical attitude and societal responsibilities.

  • PEO
    04

    To prepare graduates to learn to harness the evolving technologies as part of an organisation or as entrepreneurs.

Facilities

Engineering Geology Lab

Crystal Models, Mohr’s scale of Hardness (one box of 9 specimens), Mineral hand specimens, Rock hand specimen, Moh’s scale of Hardness (one box of 9 specimens), Wooden Trays and Wooden Trays (Polishing)

Strength of Materials Lab

UTM, Torsion Testing Machine, Brinell Hardness TM, Rockwell hardness TM

Concrete Technology Lab

CTM, Thickness and elongation gauge, slump, Ultrasonic Pulse Velocity, Rebound Hammer

Material Testing Lab

CTM, Sieve, Le chatelier apparatus, vicat plunger apparatus

Transportation Lab

Semi automatic Penetrometer , Stripping value test apparatus, Marshall Stability test apparatus, Benkelman beam, Bitumen Penetrometer and CBR test apparatus

CAD Lab

Auto Computer Aided Design Lab

Structural Engineering Lab

Penetration apparatus Ring and ball test, Los Angeles, CBR, impact testing machine, Tar viscometer

CAD Lab

BOD Incubator, Jar Test Apparatus, Muffle Furnace, pH meter, turbidity meter, Water meter, conductivity meter

SHIVALIK COLLEGE OF ENGINEERING

  • Course Outcomes (COs): It gives the resultant knowledge and skills the student acquiresat the end of each It defines the cognitive processes a course provides.

 

CO Sl.

No

COURSE OUTCOMES Mapping of course outcome with PO and PSO
PROGRAM – Civil Engineering
BAST 301 Mathematics-II
BAST 301 CO1- Solve first order differential equations utilizing the standard techniques for separable, exact, linear, homogeneous, Bernoulli cases.

CO2- Solve basic application problems described by second order linear differential equations with constant and variable coefficients.

CO3- Demonstrate their understanding of how physical phenomena are modeled using special functions

CO4- Apply partial derivative equation techniques to predict the behavior of certain phenomena.

CO5- Understand purpose and functions of infinite series and Fourier series.

CO6- Evaluate integrals along a path in the complex plane and understand the statement of Cauchy’s theorems.

PO5,PO6,PO6,PO7,PO8,PO9,PO9,PO10, PO12
BCET 302 CONSTRUCITON MATERIAL
 

BCET 302

CO1 Understand the manufacturing process of Rocks, bricks and their various properties.

CO2 Understand chemistry, properties, characteristics and classification of cement, aggregate and lime.

CO3 Understand the constituent materials for properties of fresh and hardened concrete properties and their tests.

CO4 Understand the composition of steel, aluminum and their composites and application in construction field and treatments for increasing their durability.

CO5 Select the different forms of timber and composite panels for market requirement and mechanical treatments for increasing their durability.

CO6 Describe various latest and modern construction materials, properties and their application

PO1,PO6,PO7,PO8,PO9,PO11 PO12,PSO1,PSO2
BCET 303 SURVEYING
BCET 303 CO1 Understand linear measurement, angular measurement, leveling, triangulation, trilateration and plane table surveying.

CO2 Understand the modern field surveying instrument with their working principle.

CO3 Calculate the linear measurement, angular measurement, traversing, leveling, area and volume of field, coordinate of points and make the topography map of a particular area

CO4 Understand the component of curve and apply the setting out of curve on field.

CO5 Understand the phenomena of error in surveying and calculate adjustment and correction of the surveying errors

CO6 Understand the Astronomical survey and calculate the space coordinate.

PO1, PO2, PO3, PO4, PO5, PO6, PO6, PO7, PO8, PO9, PO9, PO10, P011, PO12, PSO1,PSO2
BCET 304 BUILDING PLANNING & ARCHITECTURE
 

BCET 304

CO1 Understand the drawing of various building components

CO2 Understand building Bye laws and codes followed at the time of planning of building and terminologies use in building planning

CO3 Understanding of building planning, drawing, building services and their engineering aspects in residential and institutional building and apply them as per need of building

CO4 Able to understand the principles of architecture and architecture composition.

CO5 Able to understand the fundamentals of Town planning

CO6 Able to understand various components forming one- and two-way perspective drawing and adapts them to draw basic shapes

PO1,PO3PO5,PO6,PO7,PO10,PO11, PO12 PSO1,PSO2
BCET 305 STRENGTH OF MATERIAL
 

BCET 305

CO1 Understand different forces and their effect on beams and shafts.

CO2 Understand various stress combination on rigid and deformable solid materials

CO3 Determine the shear force and bending moment in beams for different support conditions

CO4 Apply the theory of simple bending on various sections

CO5 Determine the slopes and deflections of beams

CO6 Calculate the stress developed on thin cylinders and Spheres under internal and external pressure.

PO1,PO2,PO3,PO4,PO5,PO6, PO7,PO8,PO9,PO10,PO11, PO12,PSO1
BCET 401 ENERGY AND ENVIRONMENTAL ENGINEERING
 

BCET 401

CO1 Describe advanced level knowledge, techniques, skills and modern tools in the field of Energy and Environmental Engineering.

CO2 Distinguish the different energy generation systems and their environmental impacts.

CO3 To identify environmental problems and solutions through organized research.

CO4 To acquire analytical skills in assessing environmental impacts through a multidisciplinary approach.

CO5 Respond to global policy initiatives and meet the emerging challenges with sustainable technological solutions in the field of energy and environment.

CO6 To improve the communication and writing skill so as to face the competitive world.

PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11, PO12, PSO1, PSO2
BCET 402 CONCRETE TECHNOLOGY
 

BCET 402

CO1 Identify Quality Control tests on concrete making materials

CO2 Understand the behavior of fresh and hardened concrete

CO3 Design concrete mixes as per IS and ACI codes

CO4 Understand the durability requirements of concrete

CO5 Understand the need for special concretes

 

PO1,PO2,PO3,PO4,PO6,PO7,PO8,PO12 PSO1,PSO2

BCET403 STRUCTURAL ANALYSIS 1
BCET403 CO1 Understand the basic concept of static and kinematic indeterminacy of determinate and indeterminate beams for analysis of structures

CO2 Apply equations of equilibrium to truss structures and compute the reactions and member forces.

CO3 Evaluate and draw the influence lines for reactions, shears, and bending moments in beams and girders due to moving loads.

CO4 Calculate the internal forces in cable structures.

CO5Calculate the internal forces in arch type structures.

 

PO1,PO2,PO3 PSO1,PSO2

BCET 404 TRANSPORTATION ENGG I
 

BCET 404

CO1 Basic concept about Highway Engineering

CO2 To understand the principles of Highway geometrics design as per IRC standards and Traffic engineering.

CO3 To understand Types of pavements & Materials required for highway construction

CO4 To understand Construction procedure for different type of pavements.

CO5 To understand maintenance procedure for different type of pavements.

CO6 Design rigid and flexible pavements which comply with IRC: 37 standards, and factor influencing their maintenance.

 

PO1,PO2,PO3,PO4 PSO1

BCET405 ENGINEERING GEOLOGY AND REMOTE SENSING
 

BCET405

CO1 RECALL the names of important minerals and their composition and UNDERSTAND the significance of geology in the domain of civil engineering, and the physical properties of minerals, the internal structure of the earth, and the different types of rocks.

CO2 CLASSIFY minerals based on their physical properties and CLASSIFY rocks based on origination and engineering properties

CO3 UNDERSTAND the process of weathering of rocks and RECALL the factors affecting weathering, also EXPLAIN the different types of deposits

CO4 UNDERSTAND folds faults and their classification, and the consequences of geological failures

CO5 UNDERSTAND the principles of remote sensing and photogrammetry and ANALYZE digital images

CO6 UNDERSTAND basic concepts of GIS and ANALYZE vector and raster data

 

PO1,PO2,PO3, PO4,PO5, PO6,PO7,PO8,PO9,PO10,PO11, PO12, PSO1,PSO2

BCET 501 DRCE
BCET 501 CO1 Understand the mechanical properties of steel and concrete.

CO2 Understand and apply the design codes related to the design of reinforced concrete members.

CO3 Analyze and design reinforced concrete flexural member.

CO4 Analyze and design for shear and development length in reinforced concrete members.

CO5 Analyze and design reinforced concrete compression member.

CO6 Analyze and design for Staircase and Retaining walls.

 

PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO12 PSO1,PSO2

BCET 502 GEOTECHNICAL ENGINEERING I
BCET 502 C01 Understand the origin of soil and to able identify different types of soil

CO2 Able to calculate the index and engineering properties of different types of soil

CO3 Understand the influence of water flow on the engineering behavior of soils.

CO4 Apply the concept of effective stress and understands stress distribution within a soil mass

CO5 Able to apply the concept of compressibility for determining the settlement in soil

CO6 Identify shear strength parameters for field conditions and able to classify soil slopes and interpret the FOS for different types of soil.

 

PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO10,PO12 PSO1,PSO2

BCET 503 FLUID MECHANICS
BCET 503 CO1 Identify and obtain the values of fluid properties and relationship between them.

CO2 Examine the pressure variation, pressure measurement and also determine the pressure on submerged and flowing bodies.

CO3 Understand the principles of continuity, momentum, and energy as applied to fluid motions and analyze the fluid flow problems with the application of the mass, momentum and energy equations.

CO4 Apply dimensional analysis to predict physical parameters that influence the flow in fluid mechanics.

CO5 Identify energy losses in pipe transitions and sketch energy gradient lines.

CO6 Understand viscous and no viscous flow over bodies, boundary layer calculation of lift and drag forces.

 

 

 

PO1, PO2, PO3, PO4, PO5, PO6, PO7, PO8, PO9, PO10, PO11, PO12, PSO1, PSO2

BCET 504A STRUCTURE ANALYSIS II
BCET 504A CO1 Apply slope deflection method to analyze beam and portal frame.

CO2 Apply moment distribution method toanalyze beam and portal frame.

CO3 Apply plastic method to analyze beam and portal frame.

CO4 Apply Clapeyron’stheorem toanalyze beam and portal frame.

CO5 Apply stiffness methods to analyze beam and portal frame.

CO6 Apply flexibility methods to analyze beam and portal frame.

 

PO1,PO2,PO3,PO4,PO5,PO6, PO8,PO9,PO10,PO12, PSO1,PSO2

BOEC 505B TRANSPORTATION ENGINEERING II
BOEC 505B CO1 Understand the functions of pavement components

CO2 Understand the procedure of pavement construction procedure

CO3 Understand the traffic loads for design and analysis of pavement

CO4 Understand the joint behavior in rigid pavements

CO5 Understand the principles of high maintenance

CO6 Understand the traffic characteristics.

 

 

 

PO1,PO2,PO3,PO4 PSO1,PSO2

BCET601 DESIGN OF RC STRUCTURE
BCET601 CO1 Be able to Calculate all types of design loads on buildings.

CO2 Be able to identify and interpret the appropriate relevant industry design codes.

CO3 Use moment redistribution concept to Design of continuous RC beams.

CO4 Analyze and design the components of Teams bridge.

CO5 Analyze and design the various types of water tanks.

CO6 Analyze and design of RC framed buildings.

PO1,PO2,PO3,PO4,PO5, PO6,PO7,PO8,PO9,PO10 PO11,PO12,PSO1,PSO2
BCET 602 ENVIRONMENTAL ENGG I
BCET 602 CO1 Identify the source of water and water demand apply the water treatment concept.

CO2 Select the treatment to raw water with suitable intake with usefulness for domestic andconstruction purpose.

CO3 Designing and laying the pipe network for water supply and Sewage disposal effectively.

CO4 Plan and implement plumbing work effectively by choosing suitable materials.

CO5 Calculate waste water generation with suitable water carriage system.

PO1,PO2,PO5,PO6,PO7 PO9,PO11,PO12 PSO1,PSO2
BCET 603 OPEN CHANNEL FLOW
BCET 603 CO1 Understand the Difference between open channel and pipe flow by understanding the concepts of open channel flow

CO2 Analyze geometrical parameters of an open channel & evaluate efficient channel sections for different conditions.

CO3 Analyze the nature of flow and flow profiles using concept of Specific energy and GVF equation.

CO4 Understand and apply the principle of hydraulic jump to analyze various open channel surges and its applications Understand,

CO5 Classify the profile for spatially varied flow using numerical methods Apply

CO6 Apply Energy & momentum concepts of fluid in open channel, calculate Energy dissipation”

 

PO1,PO2,PO6,PO8,PO12 PSO1,PSO2

BCET 604 A GEOTECHICAL ENGINEERINGII
BCET 604 CO1UNDERSTAND the concept of active and passive earth pressure and DESIGN retaining walls

CO2 ANALYZE the stability of retaining walls

CO3 COMPARE the different types of shallow foundation and UNDERSTAND the theory of bearing capacity of soil and CALCULATE the stresses and settlement in shallow foundation

CO4 COMPARE the different types of deep foundation and CALCULATE the load capacity of piles and UNDERSTAND procedure of pile load test

CO5 EXPLAIN the different types of caissons and the method of construction and CALCULATE the bearing capacity of well foundation and ANALYZE the stability of well foundation

CO6 EXPLAIN the different types of machine foundation and UNDERSTAND the different ways of soil exploration

 

PO1,PO2,PO3,PO4,PO5 PSO1,PSO2

BOEC 605 C ADVANCED PAVEMENT DESIGN
BOEC 605 C CO1 Students will able to outline selection of transportation structures, factors affecting design of various transportation structures and input parameters required for design.

CO2 Students will able to describe pavement design, application and basic principles of pavement design.

CO3 Students will able to calculate the stresses and deflections in pavements, design methodology and arrive at design values for various transportation structures.

CO4 Students will able to identify various construction procedures of both Flexible and igid pavements.

CO5  Students will able to categorize the safety aspects of the pavements specifically in terms of friction and other related distresses.

CO6 Students will able to measure the pavements based on the functional and structural characteristics.

 

PO1,PO2,PO3,PO4 PSO1,PSO2

BCET 701 ENVIRONMENTAL ENGG II
BCET 701 CO1 Appreciate the importance and methods of operation and maintenance of wastewater supply systems.

CO2 Communicate effectively in oral and written presentations to technical and non-technical audiences the applications of waste water treatment and its significance in society.

CO3 Be able to understand the concept of sewerage system and its network layout.

CO4 Appreciate the understanding of different processes involved in the treatment of sewage.

CO5 Be able to apply the basis of an Environmental Management System (EMS) to an industrial activity.

PO1, PO2, PO3, PO4, PO5, PO6, PO7,PO8, PO9, PO10, PO11, PO12, PSO1,PSO2
BCET 702 DESIGN OF STEEL STRCUTURES
BCET 702 CO1 Identify and compute the design loads on a typical steel building

CO2 Able to identify and interpret the appropriate relevant industry design codes.

CO3 Identify the different failure modes of steel tension and compression members and beams, and compute their design strengths.

CO4 Students will be able to check and specify the serviceability requirements of the designed steel structures.

CO5 Identify the different failure modes of bolted and welded connections, and determine theirdesign strengths.

 

PO1,PO2,PO3,PO6,PO8 PO11,PO12 PSO1,PSO2

BCET 703 Railway & And Airport Engineering
BCET 703 A CO1 Explain the function of various elements of railways

CO2 Plan and design various elements of railway.

CO3 Explain the various principles traffic control in railway.

CO4 Explain about layout, design and construction of permanent way, runway and taxiway.

CO5 Illustrate the various principles traffic control in airport.

CO6 Explain the function of various elements of railway & and airway and their maintenance.

 

PO1,PO2,PO3,PO4 PSO1,PSO2

BOEC 704 HYDROLOGY
BOEC 704 CO1 Memorize the hydrologic cycle and related major water quantity and quality challenges and their relevance to human health and wellbeing, ecosystem and the food supply.

CO2 Interpret the role of hydrology, water resources management and the legal and economic frameworks associated with addressing these challenges.

CO3 Experiment with basic water properties and can measure basic physical and biochemical aspects of water associated with hydrologic processes.

CO4 Appraise statistical, analytical and numerical methods and associated limitations of modeling hydrologic flow and transport processes, and can apply quantitative models towards the analysis of water quantity, quality and management problems.

CO5 To influence runoff and hydrograph estimation and apply into engineering practices.

CO6 Anticipate water management, communication and teamwork skills needed    to work constructively and professionally on multidisciplinary teams.

PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11, PO12, PSO1,PSO2
BCET 801 CONSTRUCTION PLANNING AND MANAGEMENT
BCET 801 CO1 Understand the roles and responsibilities of a project manager

CO2 Develop schedule of activities in a construction project.

CO3 Explain the function and application of different types of equipment used in construction site.

CO4 Understand quality control and inspection in construction industry.

CO5 Integrate and apply theoretical concepts, ideas, tools and techniques to Construction practice.

CO6 Understand Significance of variability and estimation of risk in construction.

 

 

PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11, PO12,PSO1,PSO2

BCET 802 SEISMOLOGY AND EARTHQUAKE RESISTANCE DESIGN OF BUILDINGS
BCET 802 CO1 Understand about the occurrences of earthquakes and its effect on damped and un-damped shear structures.

CO2 Determine the free and forced vibration response of single degree of freedom structure

CO3 Calculate the natural frequency and mode shapes of the two degree of freedom system.

CO4 Determine the response of second degree of freedom structure under harmonic motion

CO5 Determination of the mode shapes and approximate natural frequencies of multi storied buildings

CO6 Analyze the structure using IS 1893code

PO1,PO2,PO3,PO4,PO5,PO6,PO7,PO8,PO9,PO10,PO11, PO12, PSO1,PSO2
BCET 803A IRRIGATION ENGINEERING
BCET 803A CO1 UNDERSTAND the various irrigation schemes and CALCULATE water requirement of crops and CALCULATE irrigation efficiency

CO2 UNDERSTAND the concept and need of diversion works RECALL the various parts of weir and barrage

CO3 DESIGN weir and CLASSIFY earthen dams and spillways

CO4 UNDERSTAND types of irrigation canals and DESIGN lined and unlined irrigation canals

CO5 UNDERSTAND cross drainage works and its types and UNDERSTAND canal escapes and canal falls and DESIGN canal fall CO6EXPLAIN water logging causes and the principles of drainage

 

 

PO1,PO2,PO3,PO4,PO6 PO7,PO12,PSO1,PSO2

BCET804 PRESTRESSED CONCRETE
BCET804 CO1 Analyze the prestressed members subjected to flexure loads or bending.

CO2 Identify and calculate the Losses of Prestress& Deflections in prestressed members

CO3 Calculate the Flexural Strength of Prestressed Concrete Sections.

CO4 Calculate the Shear Strength of Prestressed Concrete Sections.

CO5 Understand the mechanism of the Transfer of Prestress forces in Pre tensioned Members and Anchorage Zone Stresses in Post Tensioned Members.

CO6 Understand the mechanism of the Transfer of Prestress forces in Pre tensioned Members and Anchorage Zone Stresses in Post Tensioned Members.

 

 

 

PO1,PO2,PO3,PO6,PO8 PSO1,PSO2

Vision & Mission

Vision of the Department

To be a centre of excellence in the field of civil engineering and to create the new technology for future requirements with the necessary knowledge, skills and attitudes of civil engineering that can be entrusted by the society to lead a sustainable world with enhanced quality of life.

Mission of the Department

  • To prepare effective and responsible graduate engineers for global requirements by providing quality education.
  • To constantly strive to improve pedagogical methods employed in delivering the academic programs.
  • To conduct basic and applied research to enhance intellectual property.
  • To provide consultancy to the neighborhood and cultivate the spirit of entrepreneurship
  • To encourage students to pursue higher education and take competitive exams and various career enhancing courses.
Quick Enquiry

    X
    Enquire Now